Samsung Soundbar Stuck on Wait When Pairing [Solution]

Getting stuck is surely frustrating, and the problem gets even worse when you are planning to enjoy music on your soundbar, and it gets stuck out of nowhere.

If you are one of those people, who have their Samsung soundbar stuck on wait when pairing, then this guide is for you, as in this article we have compiled the complete solution for this issue.

That being said, let’s jump straight into the matter.

Steps for the Samsung Soundbar Stuck on Wait When Pairing Solution

We have been in your shoes, and know that it is quite embarrassing when your soundbar gets stuck in the Bluetooth pairing mode, and you cannot do much about this issue.

Thus, we have compiled all the steps that you need to do in order to get rid of the Bluetooth waiting issue on the Samsung Soundbar.

Below are the steps to get rid of the Samsung soundbar stuck on Bluetooth wait.

1. Reboot Your Samsung Soundbar & Device

Often neglected, rebooting your gadgets can get rid of many issues, and this pairing issue can also be resolved by rebooting both of all devices.

Firstly, you need to turn off your soundbar and unplug it from the power socket, then you have to wait at least 10 seconds before trying to turn it back again. Similarly, you have to reboot your TV.

2. Get the Soundbar in the Bluetooth Pairing Mode

Now, you have to get your soundbar in Bluetooth pairing mode. Most likely, you did not have your soundbar in the Bluetooth pairing mode before, thus the soundbar is not connecting to the Bluetooth devices.

After your soundbar has restarted, press the Source button for few times, until it shows you the Bluetooth Ready mode. Afterward, press and hold the Source button again, and release it, when it starts displaying the “BT Pairing”.

3. Reset Your Samsung Soundbar

If you are still having Bluetooth connectivity problems on your soundbar even after trying the two steps given above, then probably time for a reset.

Resetting the Samsung soundbar is easy, and quick. Firstly, you will need to reboot the soundbar. After the Samsung soundbar has rebooted, now have to press and hold the power button either on the soundbar or the remote control for about 30-40s until you see the “INIT OK” written on your soundbar.

Congrats! You have now successfully reset your Samsung soundbar, and your soundbar should connect to your device using Bluetooth.

You can also visit our detailed review on the Best Soundbar for Samsung TV.

Frequently Asked Questions (FAQs)

Why is My Samsung Soundbar Stuck on the Bluetooth Pairing?

There can be different reasons for this issue, but most commonly, this issue is caused due to the long distance between your soundbar and device, the soundbar not in pairing mode, or when there is some software glitch.

Can We Resolve the Bluetooth Wait Issue on the Samsung Soundbar?

Yes, you can solve the Bluetooth not connecting issue on the Samsung soundbar. Above, we have compiled all the steps that you require for resolving the Samsung soundbar not connecting through Bluetooth.

Can I Reset the Samsung Soundbar Without a Remote?

Yes, you can reset the Samsung soundbar without using a remote. Above, we have given the complete method for resetting the Samsung soundbar without the remote.

Conclusion

Bluetooth pairing is one of the most commonly used connectivity options. It can be very inconvenient situation in which the Samsung soundbar is not connecting to Bluetooth.

In this guide, we have compiled all the steps that you require to get rid of this issue. You can us about your take on this issue in the comments section below.

Read also: Why Samsung Soundbar Keeps Switching to TV Speakers?

Leave a Comment